Product Categories
Contact Us

Ningbo Davison Machinery Manufacture Co.,Ltd

Address: No. 199, Xinmei Road, Gaoxin Zone, Ningbo City, Zhejiang Province, China

Manager: Ms Lisa 

E-mail:export@dongxiong.com

Tel: 0086-1886-866-7352

Fax:0086-574-87630666


News

Standard HF Welding Machine Better Improve The Efficiency Of High-frequency Machine

Standard HF Standard HF Welding Machine, which is often we say high frequency machine, Standard HF Standard HF Welding Machine, heat sealing machine. Yellow River ultrasonic small series about the work of high-frequency Standard HF Welding Machine to pay attention to what the process of attention. The following are listed in the high frequency machine work process need special attention, do the following points, you can better improve the efficiency of high-frequency machine, improve product quality, ensure the stable operation of the machine, extend the machine Service life.

High-frequency Standard HF Welding Machine use process need to pay attention to the following questions:

1, high-frequency Standard HF Welding Machine must be equipped with a good grounding protection side, which is connected to the correct ground, is conducive to Standard HF Welding Machine protection of personal safety.

2, relatively humid, dust and more space is not suitable for high-frequency Standard HF Welding Machine to be placed in the appropriate work space, need to clean, not too much dust.

3, the Standard HF Welding Machine at work, the electronic vacuum tube will produce high-energy heat, Standard HF Welding Machine can not be placed in the machine will produce high heat, or other high temperature range of space, not suitable for direct exposure to the sun, Environment on the Standard HF Welding Machine is an important component, vacuum tube will have a great detrimental to the heat factor, it is not recommended to place.

4, Standard HF Welding Machine in each boot, the general need to wait 10-15 minutes, is conducive to Standard HF Welding Machine electronic vacuum tube preheat to protect the life of the vacuum tube, this is an important understanding of the machine.

5, the machine at both ends of the upper and lower electrodes, or between the upper and lower machines die, can not directly touch together, between the upper and lower mold must be insulators or work pieces, that is, when the workpiece left the machine, can not make up and down Electrode, or the upper and lower molds are in direct contact.

6, when operating the Standard HF Welding Machine, when the output high frequency, remember not to touch the machine directly on the electrode output (that is, Standard HF Welding Machine on the mold), do not use universal table, test meter, other low-frequency, low voltage instrument, Measuring the upper pole output, which will lead to accidents, is extremely incorrect operation of high-frequency Standard HF Welding Machine.

7, in the use of the machine, the need to check the next extreme (lower mold) insulation material, if found to have damaged, burned, breakdown of the place, please immediately replace the insulation material to prevent direct contact with the upper and lower electrodes, Phenomenon, damage to machines and machine molds and damage to machined parts.

8, if the high-frequency Standard HF Welding Machine often occur phenomenon of ignition, first check the smoothness of the workpiece, and then check the Standard HF Welding Machine work surface is clean, and then the insulation material is not intact, and finally check other suspicious issues.

9, high-frequency Standard HF Welding Machine processing of the workpiece, as far as possible without water, dust, pay attention to clean and dry, otherwise it will make the machine easily lead to ignition.

10, when the machine's machine to open the power, you will hear the fan rotation of the sound (4KW, 5KW sound smaller), this is the high-frequency vacuum tube in the fan under the heat generated, if the fan failure, need to immediately shut down Power, immediately arrange technical maintenance, or will lead to high-frequency tube damage.