Product Categories
Contact Us

Ningbo Davison Machinery Manufacture Co.,Ltd

Address: No. 199, Xinmei Road, Gaoxin Zone, Ningbo City, Zhejiang Province, China

Manager: Ms Lisa 

E-mail:export@dongxiong.com

Tel: 0086-1886-866-7352

Fax:0086-574-87630666


2 Station HF PVC Blister Packaging Machine

2 Station HF PVC Blister Packaging Machine

If you are planning to buy high-quality and newest CE certification 2 station hf pvc blister packaging machine from one of the best 2 station hf pvc blister packaging machine manufacturers and suppliers or you want to check the price with a professional factory and company, please feel free to...

Products Specifications:

If you are planning to buy high-quality and newest CE certification 2 station hf pvc blister packaging machine from one of the best 2 station hf pvc blister packaging machine manufacturers and suppliers or you want to check the price with a professional factory and company, please feel free to contact Davison Machinery.

2 Station HF PVC Blister Packaging Machine is used to create many different types of packaging including clam shell packaging and two piece blister seal packages. Especially for blister repair welding or small quantity packaging.


Features:

1.Fast and precise tooling change: special design can change the tooling in 2 minutes

2.Safe : The machine equipped with safety protection system, upper plate is equipped with protective shield

3.Good positioning : the slide table is automatically controlled , ensure the slide table not hurt the hands 

4.The machine can be adjusted according to different thickness material .

5.Equipped with OMRON thermostat , can precisely control welding temperature , make sure the products can be made perfectly.

6.Equipment failure rate is a low : use good quality spare parts

7.Machine easy to operate : the worker can use the machine after short training

8.Machine has special structure design which can exerts even pressure on the workpiece , the pressure is

adjustable

9.Special design can push the finished workpiece out , easier for worker to take the finished product from cavity


Power : 5KW

Installed power : 8KW

Frequency : 27,12 MHz ± 0,6%

Way to cool the tube : Air cooled metal-ceramic triode

Power supply :3x380 V/50 Hz

Electrode pneumatic press :0,4-0,7 MPA

Heated electrode plate :Regulated up to 120°C

Electrodes gap : 220mm

Lower electrode :600*400*30mm

Table height : 950mm

Pre-heat time : summer , about 5 minutes

Winter : about 8 minutes

Weight : 380KG